Here is a picture of the head after getting a mirror finish	Here is another picture of the head. I got a good price on the work, and it was done quickly	Cleaned up the short block with acetone	MLS head gasket
MLS head gasket copper coated	ARP Head studs added	Gasket plus ARP	Set the head down
Another view	torqued the head bolts	starting to add some of the parts	More parts
and more stuff	water lines	inside the head, with web cams and coil pack.	AC bracket added

What is that!!!??? Oh CRAP.. Needle bearing from the tranny!	Tranny coming apart again!	Motor more completed	Front shot with turbo and manifold added
Another shot	Oil pan splash shield bolts don't line up with the 93	Here are the bolt holes.	Drilled a new hole
They drill into the crank to balance it.	Motor flipped over on the stand	Easier to work on this way.	Another shot of the crank
More pictures of the crank balancing and the 1st gen oil squirters.	Added the oil pickup	Make sure you scrape off the extra gasket material where the oil pan goes.	Here is the other side

Another view upside down

And another...